Verified public resource
STAINLESS STEEL 304 - MOPA Color (Blue) Laser Settings - JPT M7 60W
A checked-in starting recipe for STAINLESS STEEL 304 - MOPA Color (Blue) on JPT M7 60W. Laser, lens, focus, coating, and material batches vary, so test this recipe on matching scrap before production.
Specifications and context
- Laser source
- Fiber (MOPA)
- Model
- JPT M7 60W
- Power
- 45%
- Speed
- 1000 mm/s
- Frequency
- 300 kHz
- Passes
- 1
- Hatch interval
- 0.002 mm
- Pulse width
- 6 ns
Production guidance
Use these parameters as a documented starting point, not a universal prescription. Material batches, optics, focus, air assist, source age, and machine calibration all affect the finished result. Confirm focus, protect the work area, and run a small test on matching scrap before committing a production piece. Record the date, material supplier, lens, focus method, and final parameter changes with the saved job so the result can be reproduced instead of rediscovered.
- 1. Blue color via thick oxide layer.
- 2. Run a small material test first, confirm focus and lens, then change one variable at a time.
- 3. Record the successful result in the Parameters Library so the next production run is repeatable.