Parameters Library: Baselines & Community

Browse bundled baselines and community laser settings for wood, metal, acrylic, leather, and glass. VERIFIED status requires three independent vouches.

What is in the Parameters Library?

  • Bundled sheets are starting baselines with no independent vouch record or proof-burn photo; validate them on matching scrap.
  • A community sheet reads VERIFIED only after three independent operators vouch for it — one vouch each.
  • Operators can attach proof-burn photos as additional evidence; photo availability varies by sheet.
  • Every sheet can be rescaled to your wattage and lens before you read it, rather than copied as one fixed number.
  • Free to browse — no credits or account required to search the library.

Open Parameters Library — Free to Start See Real Results →

Related to Parameters Library

Field Manual: Parameters Library →Wood Settings Cheat Sheet →Burn Card Settings Report →Laser Lab Calculators →Production Bridge Export Packages →

Public Resources

STAINLESS STEEL 304 - Black Anneal Laser Settings - JPT 30W →STAINLESS STEEL 304 - Deep Engrave Laser Settings - Raycus 30W →STAINLESS STEEL 304 - MOPA Color (Gold) Laser Settings - JPT M7 60W →STAINLESS STEEL 304 - MOPA Color (Red) Laser Settings - JPT M7 60W →STAINLESS STEEL 304 - MOPA Color (Blue) Laser Settings - JPT M7 60W →STAINLESS STEEL 304 - MOPA Color (Green) Laser Settings - JPT M7 60W →ALUMINUM - White/Frost Mark Laser Settings - Raycus 50W →ALUMINUM - White Mark on Anodized Laser Settings - Raycus 30W →ALUMINUM ANODIZED - Dog Tags Laser Settings - Fiber 50W →ALUMINUM - Engrave (20W) Laser Settings - Fiber 20W →BRASS - White Mark Laser Settings - Raycus 30W →BRASS - Deep Engrave Laser Settings - Raycus/JPT 50W+ →BRASS - 3D Coin Deep Engrave Laser Settings - Fiber 50W+ →BRASS - Engrave (20W) Laser Settings - Fiber 20W →COPPER - Engrave (20W) Laser Settings - Fiber 20W →GOLD - Engrave (20W) Laser Settings - Fiber 20W →GOLD - Deep Mark (20W) Laser Settings - Fiber 20W →GOLD - Black Mark (20W) Laser Settings - Fiber 20W →SILVER - Engrave (20W) Laser Settings - Fiber 20W →TITANIUM - Engrave (20W) Laser Settings - Fiber 20W →TITANIUM - Color Mark (20W) Laser Settings - Fiber 20W →STEEL - Engrave (20W) Laser Settings - Fiber 20W →ZINC - Engrave (20W) Laser Settings - Fiber 20W →POWDER COAT - Engrave/Ablate Laser Settings - Fiber 20W →POWDER COATED TUMBLER - Engrave Laser Settings - Fiber 50W →ELECTRO PLATING - Ablate (20W) Laser Settings - Fiber 20W →DELRIN (Black) - White Mark Laser Settings - Fiber 30W+ →PMAG (Polymer) - Mark (20W) Laser Settings - Fiber 20W →POLYESTER - Mark (20W) Laser Settings - Fiber 20W →SLATE - Photo Raster Laser Settings - Fiber 50W →GRANITE - Engrave (20W) Laser Settings - Fiber 20W →LEATHER - Engrave (20W) Laser Settings - Fiber 20W →STAINLESS STEEL (UV) - Black Mark Laser Settings - UV 5W →ACRYLIC (Cast) - CO2 Engrave Laser Settings - CO2 40W →ACRYLIC (Cast) 3mm - CO2 Cut Laser Settings - CO2 40W →BAMBOO - CO2 Engrave Laser Settings - CO2 40W →WOOD (Cherry) - CO2 Engrave Laser Settings - CO2 40W →WOOD (Walnut) - CO2 Engrave Laser Settings - CO2 40W →WOOD (Maple) - CO2 Engrave Laser Settings - CO2 40W →BASSWOOD PLYWOOD 3mm - CO2 Engrave Laser Settings - CO2 40W →BASSWOOD PLYWOOD 3mm - CO2 Cut Laser Settings - CO2 40W →GLASS - CO2 Engrave Laser Settings - CO2 40W →CORK - CO2 Engrave Laser Settings - CO2 40W →MDF - CO2 Engrave Laser Settings - CO2 40W →STAINLESS BOTTLES - Fiber Engrave Laser Settings - Fiber 30W →STAINLESS STEEL 304 - MOPA Color (Purple) Laser Settings - JPT M7 60W →STAINLESS STEEL 304 - MOPA Color (Turquoise/Cyan) Laser Settings - JPT M7 60W →STAINLESS STEEL 304 - MOPA Color (Orange/Amber) Laser Settings - JPT M7 60W →STAINLESS STEEL 304 - MOPA Color (Yellow) Laser Settings - JPT M7 60W →STAINLESS STEEL 304 - MOPA Color (Black, LIPSS) Laser Settings - JPT M6/M7 30W →TITANIUM GRADE 2 - Color Mark (Blue/Violet) Laser Settings - Fiber 30W MOPA →TITANIUM GRADE 2 - Color Mark (Golden Yellow) Laser Settings - Fiber 30W MOPA →TITANIUM GRADE 2 - Color Mark (Red/Purple) Laser Settings - Fiber 30W MOPA →STAINLESS STEEL - CerMark Black (Fiber) Laser Settings - Fiber 30W →WOOD (Softwood/Pine) - Diode Engrave Laser Settings - Diode 450nm 10W →WOOD (Hardwood/Oak) - Diode Engrave Laser Settings - Diode 450nm 20W →LEATHER (Veg-Tan) - Diode Engrave Laser Settings - Diode 450nm 10W →ACRYLIC (Dark/Black) - Diode Engrave Laser Settings - Diode 450nm 10W →WOOD (Plywood 3mm) - Diode Cut Laser Settings - Diode 450nm 20W →STAINLESS STEEL - Diode Anneal Mark Laser Settings - Diode 450nm 20W →RUBBER STAMP - CO2 Engrave Laser Settings - CO2 40W →FOAM (EVA/Craft) - CO2 Engrave Laser Settings - CO2 40W →CARDBOARD - CO2 Cut Laser Settings - CO2 40W →MDF 3mm - CO2 Cut Laser Settings - CO2 60W →ACRYLIC (Cast) 6mm - CO2 Cut Laser Settings - CO2 60W →GLASS (Tumbler) - CO2 Rotary Engrave Laser Settings - CO2 60W →PAPER (90gsm) - CO2 Cut Laser Settings - CO2 40W →FELT - CO2 Cut Laser Settings - CO2 40W →STONE/MARBLE - CO2 Engrave Laser Settings - CO2 60W →ALUMINUM - Fiber Deep Engrave (30W) Laser Settings - Raycus 30W →STAINLESS STEEL 316L - Deep Engrave Laser Settings - Fiber 50W+ →GALVANIZED STEEL - Fiber Mark Laser Settings - Fiber 20W →TUNGSTEN CARBIDE - Fiber Mark Laser Settings - Fiber 50W+ →ACRYLIC (Clear/Cast) - UV Engrave Laser Settings - UV 355nm 5W →GLASS (Clear) - UV Engrave Laser Settings - UV 355nm 5W →PCB (FR-4) - UV Mark Laser Settings - UV 355nm 5W →ANODIZED ALUMINUM - UV Engrave Laser Settings - UV 355nm 5W →

Frequently asked questions about Parameters Library

Are the laser settings in the database verified?

Not all of them. Bundled sheets are clearly labeled baselines and carry no independent vouch record. A community sheet only reads VERIFIED once three independent operators have vouched for it, and each operator can vouch once. Proof-burn photos are additional evidence when present. Treat every setting as a starting point and run a test grid on matching scrap before committing a real workpiece.

How does this compare to the bigger free settings libraries?

This is a smaller library built around searchable provenance and machine-aware scaling. Bundled records are labeled as unverified baselines; community submissions can earn VERIFIED status after three independent vouches and may include burn photos. Use a larger library when breadth matters most, and use this one when its filters and scaling match your workflow.

Which machines does the parameters library cover?

CO2, fiber, diode, MOPA, and UV systems. You can filter by machine type and material to narrow to entries from setups comparable to yours.

Do I need an account to browse settings?

No. Searching and reading the database is completely free with no account and no credits. An account is only needed to submit your own tested settings.

Why do the same settings give different results on my machine?

Output power drifts with tube or source age, lens condition, focus height, and air assist. Two machines with identical spec sheets routinely need 10–20% different power — which is why a test grid matters more than any published number.

Privacy Policy| Terms of Service| Refund Policy| Contact and Support