Magazine Engraving Outlines
To engrave custom art on a rifle or pistol magazine, load a flat-side outline of the magazine body, let The Fabricator fill that outline with your art or a Style DNA pattern, then export an SVG or LightBurn file sized in millimetres. Proof the outline on tape before burning polymer.
Free Magazine outlines
- 30-Round Polymer Rifle Magazine — Gen 3 Profile
Fits the flat side face of a 30-round 5.56 polymer rifle magazine with the later-generation ribbed body, such as a Magpul PMAG GEN M3.
62.6 × 168.1 mm · Polymer · Medium density · free
- 30-Round Polymer Rifle Magazine — Gen 2 Profile
Fits the flat side face of an earlier-generation 30-round 5.56 polymer rifle magazine with the smooth body, such as a Magpul PMAG GEN M2.
61.9 × 171 mm · Polymer · Medium density · free
- Double-Stack 9 mm Pistol Magazine — Flat Side
Fits the flat side face of a full-size double-stack 9 mm pistol magazine body, such as a Glock 17 magazine.
31.9 × 108 mm · Polymer · Fine density · free
How it works
| Step | What happens | Cost |
|---|---|---|
| Load the outline | Open it in The Fabricator. The safe zone becomes your art zone automatically. | Free |
| Fill it with art | Describe the art or pick a Style DNA pattern; it is generated inside the outline, not pasted over it. | Published per-run credit cost; failed runs are refunded |
| Export | Download an SVG or LightBurn file sized in millimetres, or a raster PNG. | Included |
| Proof and burn | Print or tape-proof the outline on the real part, then run a test on scrap. | — |
Frequently asked questions
Which parts do these Magazine outlines fit?
Fits the flat side face of a 30-round 5.56 polymer rifle magazine with the later-generation ribbed body, such as a Magpul PMAG GEN M3. Fits the flat side face of an earlier-generation 30-round 5.56 polymer rifle magazine with the smooth body, such as a Magpul PMAG GEN M2. Fits the flat side face of a full-size double-stack 9 mm pistol magazine body, such as a Glock 17 magazine.
Are these engraving outlines free?
Yes. Every first-party outline here is free to open in The Fabricator and to export. Filling one with AI-generated art uses credits at the published per-run price, and failed runs are refunded automatically.
Are the dimensions exact?
They are nominal reconstructions from published dimensions, not caliper-verified factory geometry. Proof each outline on paper or masking tape against your actual part before engraving it.
What if my part is not listed?
Photograph it on the Photo to Outline tool to trace a true-scale outline, or request it on the feature request board so it can be added to the library.
Templates are described by what they fit. PMAG and Magpul are trademarks of Magpul Industries Corp., Glock is a trademark of Glock Ges.m.b.H., P320 and SIG Sauer are trademarks of SIG Sauer, Inc., and Smith & Wesson is a registered trademark of Smith & Wesson Corp. Reticle Red is not affiliated with, endorsed by, or sponsored by any of them.
Privacy Policy| Terms of Service| Refund Policy| Contact and Support