Package a Laser Cut File for LightBurn with a Scrap-Test Card
Watch the 1:57 Production Bridge tutorial, recorded on the live site, with chapters, a step-by-step PDF guide and a link to open the tool. Free to watch.
In this tutorial
- What Production Bridge is: an open handoff. It prepares files and never connects to or fires your laser
- ACTION COST: FREE, with a Machine Bay profile (Operator)
- The SVG preparation checklist for your own files
- Puzzle Generator → PACKAGE IN PRODUCTION BRIDGE: the cut file arrives at 150 × 150 mm with Vector cut set
- Context: machine profile, Calibration Passport or manual settings, material and operation
- Recipe: speed, power, passes, interval, plus frequency and pulse width for fiber and MOPA
- DOWNLOAD PRODUCTION PACKAGE: one ZIP with project.lbrn2, scrap-test.lbrn2, source.svg, manifest.json, README.txt and checksums.json
- Run the scrap card in LightBurn first, then approve production settings
Chapters
- 0:00 Intro
- 0:11 An open handoff, not machine control
- 0:27 Your own SVG
- 0:37 PACKAGE IN PRODUCTION BRIDGE
- 0:54 Machine and Calibration Passport
- 1:08 3. Recipe
- 1:20 Every setting is an estimate
- 1:38 In LightBurn
What the Production Bridge tutorial covers
- 0:11 — An open handoff, not machine control
- 0:27 — Your own SVG
- 0:37 — PACKAGE IN PRODUCTION BRIDGE
- 0:54 — Machine and Calibration Passport
- 1:08 — 3. Recipe
- 1:20 — Every setting is an estimate
- 1:38 — In LightBurn
Find the Right Laser Tool for Your Job See Real Results →
Privacy Policy| Terms of Service| Refund Policy| Contact and Support